Sign In | Join Free | My ismap.com
China FORWA PRECISE PLASTIC MOULD CO.,LTD. logo
FORWA PRECISE PLASTIC MOULD CO.,LTD.
Chinese supplier of precision plastic molds with 20 years of experience Chinese supplier of plastic products with 20 years of experience
Active Member

8 Years

Home > Injection Molding Threads >

Internal / Outside Injection Molding Internal Threads NPT Thread Standard

FORWA PRECISE PLASTIC MOULD CO.,LTD.

Internal / Outside Injection Molding Internal Threads NPT Thread Standard

Brand Name : FORWA

Model Number : F16125

Certification : ISO9001:2008 ISO14001:2004

Place of Origin : China

MOQ : 1set

Price : negotiation

Payment Terms : T/T

Supply Ability : 50sets per month

Delivery Time : 35 days T1

Packaging Details : Mold : packed by wood carton , Plastic parts : box

Product Name : Plastic injection mold

Type : unscrewing with hydraulic cylinder

Cavity : 1*1

Core/Cavity material : 1.2343/1.2311/SKD61,S136,P20,H13,738H ...

Surface finishing : VDI3400 27

Runner system : Hot runner

Standard : HASCO

Raw material : PA6 GF35

Contact Now

Internal thread outside thread types of injection molding thread NPT thread standard

Specifications:

Forwa-Mould , locating in Dongguan, China, is a professional plastic injection mould manufacturer with years experience in this field. We can provide high precision complex hardened moulds, prototype and soft moulds.

We equipped high speed CNCs, Wire cuts in house. We use software (i.e. UG, Pro-E, IGS, Master Cam, AutoCAD, and Solidwork ) for mould design and MoldFlow analysis for our customers before mould manufacturing. Standard components we use to build the mould are purchased from DME, HASCO etc. Also, COC for all steel we purchase will be provided.

Component parts that are critical in the manufacturing of products for a wide arrage of industries and applications including:

  • Medical
  • Electronics
  • Automotiv
  • Industrial
  • Consumer
  • Telecommunications
  • Environmental
  • Computers
  • Point-of Purchase
  • Military
  • Construction
  • Security

Male threads are less complicated to produce than female threads. Male threads are cast as an open and shut injection mold except in some instances where the rest of the part design dictates where the parting line will be located. If male threads need to be cast in the vertical position, the use of cam action or hydraulic action slides is required because of the undercut that is produced from the thread.

On the contrary, casting female threads always present an undercut situation. These type of threads need to be unscrewed in order to have the part removed from the injection mold. There are different ways to achieve this. The most common way used is by hydraulic or electrical motors that automatically unscrew the threaded core from the molded part. The hydraulic motor is the least expensive option. Threaded cores have wurm gears attached which mate with the main drive gear. There is a chain that connects the mold drive gear to the gear on the drive motor shaft. There are a few different options of unscrewing the cores which are sometimes dictated by the part design. The most common application is after the injection mold opens, the cores are unscrewed by the actuation of the unscrewing motor. The time can be set so the motor stops once the part is unscrewed off the core. In this application the part needs to be held in place so the part does not turn during the unscrewing cycle. This can be achieved by a variety of designs. Again, this is always dictated by the part design. In some instances the threads need to be unscrewed before the mold opens. This is achieved by timers and/or the machine control. Usually, this option of molding female threads is incorporated for high production parts because of the expense involved.

In the case of low volume and prototype injection molded parts, the female threads are cast with hand-loaded cores. In this process threads are commonly ground on three hand-loaded cores. One core needs to be loaded into the mold by the means of locating pins to position the core into the mold open position. The mold then goes through the injection molding cycle. After the mold opens, the part is ejected with a hand-loaded core attached. Another hand-loaded core is inserted into the mold. During the next molding cycle the hand-loaded core that was ejected with the part after the previous cycle is manually unscrewed from the injection molded part. This process usually doubles the cycle time of the injection molded part which in effect raises the part price but is very cost effective in producing prototype parts.

Another option to cast female threads is by the use of collapsible cores, but this is a very expensive option. By the use of these collapsible cores essentially the injection mold is considered an open and shut mold.

These are some of the most common options of producing threads on injection molded parts. These threads are able to be cast to a +/- .002 tolerance.

Pipe Thread Types and Designations

Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints in hydraulic circuits. A discussion and recommendations are provided to create an awareness of different types eads and how they are used.


Over time many different types of screw threads have been developed. Applications include fastening components, and hydraulic and pneumatic circuits. In the nineteenth century, manufacturers needing fasteners would devise their own systems. This resulted in compatibility problems. The English mechanical engineer and inventor, Sir Joseph Whitworth devised a uniform threading system in 1841 to deal with these difficulties. The Whitworth thread form is based on a 55 degree thread angle with rounded roots and crests.
In America, William Sellers set the standard for nuts, bolts, and screws which became the National Pipe Tapered Thread (NPT) in 1864. His 60 degree thread angle, in common use by early American clockmakers, enabled the American Industrial Revolution. These thread forms later became the American National Standard.
The Whitworth thread form was selected as a connecting thread for pipes, which was made self sealing by cutting at least one of the threads on a taper. This became known as the British Standard Pipe thread (BSP Taper or BSP Parallel thread). The Whitworth thread is now used internationally as a standard thread for jointing low carbon steel pipes.


The best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal is the American National Pipe Tapered Thread, or NPT. NPT has a tapered male and female thread which seals with Teflon tape or jointing compound.


Pipe threads used in hydraulic cir cuits can be divided into two types:
a)Jointing threads -are pipe threads for joints made pressure tight by sealing on the threads and are taper external and parallel or taper internal threads. The sealing effect is improved by using a jointing compound.
b) Fastening threads ?are pipe threads where pressure tight joints are not made on the threads. Both threads are parallel and sealing is affected by compression of a soft material onto the external thread, or a flat gasket.


Product Tags:

molded in threaded inserts

      

injection molding internal threads

      
Buy cheap Internal / Outside Injection Molding Internal Threads NPT Thread Standard product

Internal / Outside Injection Molding Internal Threads NPT Thread Standard Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: FORWA PRECISE PLASTIC MOULD CO.,LTD.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0